Mpempe akwụkwọ plastik nke UHWME PE1000 Engineering
Nkọwa Ngwaahịa:
Polyethylene - Ibu Molekụla Dị Elu nke Ukwuu
PE1000 nwere oke iguzogide abrasion, ezigbo ihe ndọda na ike siri ike. O nwere ezigbo iguzogide kemịkalụ, ike mmetụta dị elu na obere mmịpụta mmiri. PE1000 na-agbasokwa nri maka ngwa nhazi dị mkpa niile.
| Usoro nhazi | Ogologo (mm) | Obosara (mm) | Ọkpụrụkpụ (mm) |
| Nha mpempe akwụkwọ ebu | 1000 | 1000 | 10-150 |
|
| 1240 | 4040 | 10-150 |
|
| 2000 | 1000 | 10-150 |
|
| 2020 | 3030 | 10-150 |
| Nha mpempe akwụkwọ mmịpụta | Obosara: ọkpụrụkpụ＞20mm, oke nwere ike ịbụ 2000mm；ọkpụrụkpụ ≤20mm, nke kachasị nwere ike ịbụ 2800mm Ogologo: enweghị njedebe Ọkpụrụkpụ: 0.5 mm ruo 60 mm | ||
| Agba mpempe akwụkwọ | Eke; oji; ọcha; acha anụnụ anụnụ; akwụkwọ ndụ akwụkwọ ndụ na ndị ọzọ | ||
Njirimara Ngwaahịa:
1. Nguzogide abrasive nke na-enwekarị na thermoelectricity polymer.
2. Nguzogide kachasị mma ọbụlagodi na obere okpomọkụ.
3. Ihe na-akpata esemokwu dị ala, na ihe na-amị amị nke ọma.
4. Mmanya na-egbu egbu (anaghị agbaze agbaze, na-arapara n'ahụ).
5.Nguzogide kemịkalụ kacha mma na nguzogide nrụgide.
6. Ike nhazi igwe dị mma.
7. Mmiri kacha nta (<0.01%).
8. Paragon eletriki insulativity na antistatic behavior.
9. Ezigbo ike dị elu nke na-eguzogide redioaktivu.
10. Njupụta dị ala karịa thermoplastics ndị ọzọ (< 1g/m3).
11. Ogologo oge eji oke okpomọkụ: -269°C--85°C.
Nnwale Ngwaahịa:
Nnukwu nguzogide abrasion
| Ihe Ndị E Ji Eme Ihe | UHMWPE | PTFE | Naịlọn 6 | Ígwè A | Polyvinyl fluoride | Ígwè odo odo |
| Ọnụego eyi | 0.32 | 1.72 | 3.30 | 7.36 | 9.63 | 13.12 |
Ezigbo ihe na-eme ka mmanụ dị mma, obere esemokwu
| Ihe Ndị E Ji Eme Ihe | UHMWPE -kol | Nkume a kpụrụ akpụ-kol | A kpara ya efere-kol | E jighị efere kol chọọ mma | Kol simenti |
| Ọnụego eyi | 0.15-0.25 | 0.30-0.45 | 0.45-0.58 | 0.30-0.40 | 0.60-0.70 |
Ike mmetụta dị elu, ezigbo ike
| Ihe Ndị E Ji Eme Ihe | UHMWPE | Nkume a kpụrụ akpụ | PAE6 | POM | F4 | A3 | 45# |
| Mmetụta ike | 100-160 | 1.6-15 | 6-11 | 8.13 | 16 | 300-400 | 700
|
Arụmọrụ Ngwaahịa:
| Ihe Nnwale | Usoro Nnwale | Nsonaazụ |
| Ọnụọgụ esemokwu na-anaghị agbanwe agbanwe (ps) | ASTM D1894-14 | 0.148 |
| Ọnụọgụ Kinetic nke esemokwu (px) | ASTM D1894-14 | 0.105 |
| Modulu Flexural | ASTM D790-17 | 747MPa |
| Ike Mmetụta Izod Notched | Usoro ASTM D256-10C1 A | 840J/m P (nkwụsịtụ nkebi) |
| Ike nke Osimiri | ASTM D2240-15E1 | D/64/1 |
| Modulu tensile | ASTM D638-14 | 551 MPa |
| Ike ọdụdọ | ASTM D638-14 | 29.4MPa |
| Ogologo oge na ezumike | ASTM D638-14 | 3.4 |
Nkwakọ ngwaahịa:
Ngwa Ngwaahịa:
