Ọrụ plastik nke injinịa n'ogbe kpụrụ akpụ mc nylon66 agba na-agbanwe agbanwe nke nwere ọkpụrụkpụ 18mm Onye nrụpụta na onye na-ebunye ya

Mkpọmkpọ ọrụ plastik injinia nke a kpụrụ akpụ MC nylon66 nwere agba na-agbanwe agbanwe nke nwere ọkpụrụkpụ 18mm

Ọrụ plastik injinia nke ejiri ihe mkpuchi mc naịlọn mee, mpempe akwụkwọ naịlọn dị ọkpụrụkpụ 18mm agba, nke nwere agba 66, Foto a na-egosi

nkọwa dị mkpirikpi:

MC NaịlọnNke pụtara na Monomer Casting Nylon, bụ ụdị plastik injinia eji eme ihe n'ụlọ ọrụ mmepụta ihe zuru oke, etinyere ya ihe fọrọ nke nta ka ọ bụrụ mpaghara ụlọ ọrụ mmepụta ihe niile. A na-ebu ụzọ gbazee caprolactam monomer, ma tinye ihe na-akpali akpali, wee wụsa ya n'ime ebu na nrụgide ikuku ka o wee nwee ike ịkpụzi ya na ihe nkedo dị iche iche, dịka: mkpanaka, efere, tube. Ibu molekul nke MC Nylon nwere ike iru 70,000-100,000/mol, ugboro atọ karịaPA6/PA66. Njirimara igwe ya dị elu karịa ihe ndị ọzọ dị na naịlọn, dịka: PA6/PA66. MC Nylon na-arụ ọrụ dị mkpa karị na ndepụta ihe ndị obodo anyị kwadoro.

Zitere anyị ozi-e Ekwentị ozi-e

Nkọwa Ngwaahịa

Akara Ngwaahịa

Nkọwa Ngwaahịa:

MC Naịlọn，nke pụtara Monomer Casting Nylon, bụ ụdị plastik injinia eji eme ihe n'ụlọ ọrụ mmepụta ihe zuru oke, etinyerela ya ihe fọrọ nke nta ka ọ bụrụ mpaghara ụlọ ọrụ mmepụta ihe niile. A na-ebu ụzọ gbazee caprolactam monomer, ma tinye ihe na-akpali akpali, wee wụsa ya n'ime ebu na nrụgide ikuku ka o wee nwee ike ịkpụzi ya na ihe nkedo dị iche iche, dịka: mkpanaka, efere, tube. Ibu molekul nke MC Nylon nwere ike iru 70,000-100,000/mol, ugboro atọ karịa PA6/PA66. Njirimara igwe ya dị elu karịa ihe naịlọn ndị ọzọ, dịka: PA6/PA66. MC Nylon na-arụ ọrụ dị mkpa karị na ndepụta ihe onwunwe nke mba anyị kwadoro.

https://www.bydplastics.com/pa6-rod-product/

Agba: Eke, Ọcha, Ojii, Akwụkwọ Ndụ, Blue, Yellow, Osikapa, Osikapa, Isi awọ na ndị ọzọ.

Mpempe akwụkwọNha: 1000X2000X (Ọkpụrụkpụ: 1-300mm)1220X2440X (Ọkpụrụkpụ: 1-300mm)

1000X1000X (Ọkpụrụkpụ: 1-300mm)1220X1220X (Ọkpụrụkpụ: 1-300mm)

Nha mkpanaka: Φ10-Φ800X1000mm

Nha Tube: (OD)50-1800 X (ID)30-1600 X Ogologo (500-1000mm)

NgwaahịaArụmọrụ:

Akụ na ụba	Nọmba ihe.	Ngalaba	MC Naịlọn (Eke)	Mmanụ Naịlọn+Kabọn(Ojii)	Mmanụ Naịlọn (Akwụkwọ Ndụ)	MC901 (Anụ anụnụ anụnụ)	MC Naịlọn+MSO2 (Ojii dị mfe)
1	Njupụta	g/cm3	1.15	1.15	1.135	1.15	1.16
2	Mmiri absorption (23℃ na ikuku)	％	1.8-2.0	1.8-2.0	2	2.3	2.4
3	Ike ọdụdọ	MPa	89	75.3	70	81	78
4	Nsogbu nrụgide mgbe ọ gbasịrị	％	29	22.7	25	35	25
5	Nrụgide nrụgide (na 2% ụdị nhịahụ aha)	MPa	51	51	43	47	49
6	Ike mmetụta Charpy (enweghị oghere)	KJ/m2	Enweghị ezumike	ENWEGHỊ ezumike	≥50	Enweghị BK	Enweghị ezumike
7	Ike mmetụta Charpy (a na-akpọchi)	KJ/m2	≥5.7	≥6.4	4	3.5	3.5
8	modulus tensile nke elasticity	MPa	3190	3130	3000	3200	3300
9	Ike nke ntinye bọọlụ	N2	164	150	145	160	160
10	Ike siri ike nke Rockwell	-	M88	M87	M82	M85	M84

Ụdị Ngwaahịa:

Nke a ka mmaMC Naịlọn, nwere agba anụnụ anụnụ mara mma, nke ka mma karịa nke nkịtịPA6/PA66 na arụmọrụ nke ike, mgbanwe, ike ọgwụgwụ na ihe ndị ọzọ. Ọ bụ ihe zuru oke nke gia, ogwe gia, gia nnyefe na ihe ndị ọzọ.

MC Nylon kwukwara na MSO2 nwere ike ịnọgide na-eguzogide mmetụta na iguzogide ike ọgwụgwụ nke naịlọn a na-eme ihe, yana ọ nwere ike ime ka ikike ibu na iguzogide iyi dịkwuo mma. O nwere ọtụtụ ihe eji eme gia, bearing, planet gia, seal circle na ihe ndị ọzọ.

MmanụNaịlọnKabọn agbakwunyere, nwere obere nhazi na kristal, nke ka mma karịa naịlọn a na-eme ihe n'ozuzu ya na arụmọrụ nke ike igwe dị elu, iguzogide iyi, mgbochi ịka nká, iguzogide UV na ihe ndị ọzọ. Ọ dabara adaba maka imepụta akụkụ ígwè ndị na-ebu ibu na ihe ndị ọzọ na-eyi.

Ngwa Ngwaahịa:

NgwaahịaAsambodo:

Ụlọ ọrụ na-etinye usoro asambodo mma mba ụwa nke ISO9001-2015 nke ọma, ogo ngwaahịa ahụ kwekọrọ na ọkọlọtọ EU RoHS.

Ụlọ ọrụ anyị:

N'ịrụ ọrụ ọkachamara na mmepụta nke "ngwa eji arụ ọrụ plastik" nke ụlọ ọrụ teknụzụ dị elu, ụlọ ọrụ ahụ nwere ngwa mmepụta ebubata na ngwa nhazi CNC, nhazi pụtara ike teknụzụ dị elu, ike teknụzụ siri ike.

Ụlọ ọrụ anyị:

Q1. Anyị enweghị eserese, ànyị nwere ike imepụta dịka ihe atụ anyị nyere si dị?
A1. Ọ dị mma
Q2. Kedu otu esi ahazi akụkụ plastik?
A2. Emebere ya dịka eserese si dị
Q3. Enwere m ike ịme ihe nlele maka nnwale mbụ?
A3. Ọ dị mma
Q4. Ogologo oge ole ka usoro ihe mkpuchi ahụ dị?
A4. Ụbọchị 2-5
Q5. Kedu ihe bụ akụrụngwa nhazi gị?
A5. Ebe a na-arụzi CNC, lathe CNC, igwe igwe ihe, igwe ihe osise, igwe ihe eji etinye ihe, igwe ihe eji eme ihe, igwe ihe eji eme ihe, igwe ihe eji akpụ akpụ
Q6. Kedụ ọrụ aka ị nwere maka nhazi ngwa?
A6. Dịka ngwaahịa dị iche iche si dị, a na-eji usoro dị iche iche eme ihe, dịka igwe eji arụ ọrụ, ịpụpụ ihe, ịkpụzi ihe ntụtụ, wdg.
Q7. Enwere ike ịgwọ ngwaahịa ọgwụ n'elu? Kedu ọgwụgwọ elu?
A7. Ọ dị mma. Ọgwụgwọ elu: agba fesa, ákwà mkpuchi silk, electroplating, wdg.
Q8. Ị nwere ike inye aka n'ịchịkọta ngwaahịa ahụ mgbe emechara ya?
A8. Ọ dị mma.
Q9. Oke okpomọkụ ole ka ihe plastik ahụ nwere ike idi?
A9. Ihe plastik dị iche iche nwere ike iguzogide okpomọkụ dị iche iche, okpomọkụ kacha ala bụ -40℃, okpomọkụ kachasị elu bụ 300℃. Anyị nwere ike ịkwado ihe dịka ọnọdụ ọrụ ụlọ ọrụ gị si dị.
Q10. Kedụ asambodo ma ọ bụ asambodo ụlọ ọrụ gị nwere?
A10. Asambodo ụlọ ọrụ anyị bụ: ISO, Rohs, asambodo patent ngwaahịa, wdg.
Q11. Kedu ka ụlọ ọrụ gị si dị oke?
A11. Ụlọ ọrụ anyị nwere mpaghara dị square mita 34000 ma nwee ndị ọrụ 100.